mdsme rolling logo
Miscellaneous

The elevated track is 1,620ft long with gradients of 1 in 120 and 1 in 80, and can handle any 3½", 5" locomotives and very small 7¼ gauge locomotives. The track is like a figure of eight with one loop folded back on top of the original loop. This track was completed on Sunday December 26th 1971 after 5 years work. and replaced a previous elevated railway track. On a good day up to 6 engines can be in operation.

Currently most locomotives using the track are 5" gauge though sometimes the 3½" gauge locomotive get a good run on open days. The railway uses an extensive collection of members and club owned locomotives to operated the railway and most are pictured below.

2007 07 Minx with Willam driving 5" Gauge SECR 0-6-0 tendered locomotive
Club locomotive "MINX" an 0-6-0 tendered locomotive, based on a South Eastern and Chatham Railway built locomotive, she was built by by John & Ted Marks.

The locomotive was bequeathed to the Society in 1985. an it is a regular performer at Malden.

The locomotive is seen at Rythe station with its current guardian William.


class 47 5" Gauge British Rail Class 47 Diesel

The British Rail Class 47 diesel locomotive also known as a 'Brush Type Four' is a class of British locomotive. It was once the most numerous class, but full sized numbers are now dwindling.

This model locomotive now belongs to the society and has been a regular performer. It is petrol driven with a 50cc Honda engine which supplies a direct mechanical drive to all wheels.

2007 dELTA IN sTEAM 3½” Gauge 4-6-2 MDSME Locomotive “Delta”.
This loco was built by Jim Tuck a former member of M&DSME around the mid 1950’s and was donated to the club by his widow. This is a freelance design loco and is based on the Great Northern Atlantic 4-4-2 "Maisie" designed by LBSC. Fitted with slide valves, and inside Stephenson's valve gear. Pole type reverser/cut-off lever, mechanical lubricator, axle pump, steam injector, and a hand pump in the tender.

The locomotive was in storage from 1986 until 2005 when it was once again returned to active service.
This is a very powerful loco for its small size and can now be seen hauling passengers on sunny Open Days.

locomotive 5" Gauge BR 0-6-0T Tank

Denver Watkins is doing the final checks on his locomotive prior to running his locomotive.

The Great Western Railway (GWR) 1500 Class is a class of 0-6-0 pannier tank steam locomotive. Despite being a GWR design, all ten (nos 1500-9) were built by the Western Region of British Railways in 1949. One, 1501, survives and is currently (July 2006) in service on the Severn Valley Railway.
5” Gauge Nigel Gresley 2-8-0 LNER

5” Gauge Nigel Gresley 2-8-0 LNER
Tender Locomotive
The loco seen here with its current owner Andy in May 2007 is commonly known as the “Nigel Gresley” designed by Martin Evens.


The previous owner, Ron Gobel completed the locomotive and named it “Fl./Sgt. George Thompson V.C.” in honour of this former crew mate in bomber command. George was posthumously awarded the Victoria Cross following an attack on the Dortmund-Ems Canal on 1st January 1945 in which there Lancaster bomber was hit by heavy shell fire. George rescued two fellow crew members that day but died from has injuries three weeks later.

GWR parie 5" Gauge GWR 2-6-2 built by Peter Larkin, and driven by Ken Parker

The Great Western Railway (GWR) 4575 Class is a class of steam locomotive. They are 2-6-2T small prairie type based on the 4500 Class but with larger side tanks. No less than 11 of these tank engines survived, 4588, 5521, 5526, 5532, 5538, 5539, 5541, 5542, 5552, 5553 and 5572. 5553 was the last steam engine to leave Woodhams' Scrap yard in Barry, South Wales, in January 1990.
arthur tarrant

5" Gauge Simplex 0-6-0T

Arthur Tarrant with his 5" gauge 0-6-0T locomotive, this is a freelance design know as Simplex.

The locomotive is a good runner and well balanced, here we see Arthur just about to move off the steaming bays ready for the days activities.

loco len

5" Gauge 0-6-0PT Pannier Tank

This locomotive is seen here with builder Len Broadley on a nice summers day. This loco is a really first rate performer and runs really well.

An 0-6-0PT known as a Pannier Tank, is a type of steam locomotive built by the Great Western Railway with the water tanks carried on both sides of the boiler, in the manner of panniers. They were used for shunting duties, for branch line passenger and goods traffic and as banker engines on inclines.

time rickard

5" Gauge 0-4-0 Sweet Pea
The original Sweet Pea was designed by Jack Buckler around 30 years ago. It is not a model of a full size loco but look rather like the narrow gauge engines built by Bagnall. Because it is a narrow gauge engine it is built to a larger scale than many other engines and is notably taller and wider than many

The Sweet Pea design is very popular as the engine is relatively easy to build but it is said that no two are alike. Her boiler is most unusual as visitors may be able to see. It is known as a stay less boiler and has a so-called marine type-firebox which can be safely removed by undoing two nuts while the engine is still in steam. Sweet Pea has Hackworth valve gear which is not often seen in locomotives.

kerosee castle

Kerosene Castle
Kerosene Castle is powered by a Honda 90 motorbike engine with all 4 axles chain driven. Under the body work she looks like the aftermath of an explosion in an Ironmongers. The builder is unknown to the current owner.

An earlier owner numbered her one after the number of the last of the steam powered Castle class locomotives and named her Kerosene Castle to cock a snook at the owners of  models of such locomotives which while works of art are far less powerful than Kerosene Castle. Kerosene Castle is not based on any known prototype but is of narrow gauge outline.

5" Gauge Polly 2 Loco “Jonathan”. with Bob Dunell driving

5" Gauge Polly 2 Loco “Jonathan”.

Bob Dunnell running on his Polly 2 type locomotive “Jonathan”. This was built by Dick Westoby in 1987 from a Clarke & Co. kit.

After Dick’s death in 1989 it was boxed  away for 14 years but is now back in steam and running well.

5" Gauge "Mountaineer" 2-6-2T was built by Dick Richardson pictured in the cap dicussing the steam saftey valve detail with fellow member Len Broadley prior to a run. 5" Gauge "Mountaineer" 2-6-2T
This engine was built by Harold Richardson pictured in the cap discussing the steam safety valve detail with fellow member Len Broadley prior to a run.

The original locomotive 'Mountaineer' was built by the American Locomotive Co (Alco) in 1917. She was originally numbered 1265. She was built for the War Department Light Railways use, helped the British Army's cause in France during World War One. After the war, 'Mountaineer' remained in France, first in the north on reconstruction work and later (1935) in the south at the Tramway de Pithiviers à Toury.

When this roadside tramway closed in 1964 she was bought by a Ffestiniog director by the name of John Ransom and imported to the UK. Three years later 'Mountaineer' arrived at the Ffestiniog. The Ffestiniog railway gave her the name 'Mountaineer' which was inherited, along with the bell, from an original Ffestiniog loco that had been dismantled.

2007 07 SR Pacific Dave Geary 5" Gauge SR 4-6-0 Pacific locomotive

Pictured left is Dave Geary with his 5" Gauge SR
4-6-0 Pacific locomotive seen here in July 2007 during a successful trail steam test.

We hope that this locomotive becomes a regular performer in the future.
5" Gauge Class 20 Jim Jakes driving waiting for the 'right away' from the station staff to take another set of passengers for a train ride from Rythe High level station. 5" Gauge Class 20

Jim leaving the Raised Track station with has Class 29 loco produced by Compass House Model Engineering.

Powered by 4 x 24volt Electric motors mounted on the bogies. This loco is often seen hauling passengers on Public Open Days.

GNR stirling single 5" Gauge GNR Stirling Single 4-2-2
Privately owned and run is this beautiful Great Northern Railway 4-2-2 Stirling Single seen here during this summer 2003, it was built and run by Jim Lawson.

The Great Northern Railway (GNR) G class Stirling Single is a class of steam locomotive designed for express passenger work. Designed by Patrick Stirling, they are characterised by a single pair of large driving wheels. A total of forty nine were built at Doncaster, with some variation between, particularly improvements in boiler pressure

laura 5" Gauge Simplex 0-6-0T 'Laura'
Another popular locomotive with model engineers is this freelance 0-6-0T tank locomotive who's design name is Simplex.

It is popular design because it is quick to build and easy to maintain. The loco is seen with its builder and owner Roy Schofield. The loco is named Laura.
locomotive 3 Locomotives in a row..
Duke of Warco on the ground level track.
Electric traction on the outer raised track loop.
Steam loco on the inner track {right}.
td 5" gauge 0-6-0 Pannier Tank Locomotive

The Great Western Railway (GWR) 5700 Class is a class of 0-6-0 pannier tank steam locomotive, built between 1929 and 1950. 863 were built, making them the 2nd most produced British class of steam locomotive.

Geoff Gillet is seen here driving his locomotive
maid of kent Club Loco 'Maid of Kent' SR 4-4-0 No 758
This club locomotive is currently out of use, and is being fitted with a new boiler.

She was built in 1952 at the Model Engineering exhibition in 10 days with all work being done at the show to get a chassis working on air.
Wrythe Station Rythe Station
A busy scene at the station in about 1975, the situation is still similar, only we now have a canopy roof over this area.

Excited passengers waiting for the 'off' for a ride behind one of the engines, whilst a light engine {i.e one without passengers} runs past on the mainline.

The first elevated track was constructed and used between 1950 and 1968, this was then replaced with the second elevated track at Malden, this was twice as long as the original track. The new 2nd circuit was started by the Wheeler Brothers and other Malden members in 1965 and the original low level circuit was completed ready for the Easter 1968 open days. In October 1968 a start was made on the high level part of the circuit and this was completed on Sunday December 26th 1971. when the high level and low level circuit circuits were joined together.

The late Robbie Roberts who helped build the second circuit used his 3½" gauge locomotive named 'Tich' to christen the railway track on Boxing Day December 26th 1971. This very small locomotive had wheels of just 1 3/4" dia and cylinders of 11/16" bore which proved any loco could use the track regardless of the gradients.

Comments, feedback and corrections are welcome. Please use the 'Contact us' link above..
Last modified:
Copyright © 1997 - 2008 Malden and District Society of Model Engineers Ltd